ACCESSORIES

Framon Code Key Machine Accessories from HATA
Optional Accessories for the #1, #2 or #2D Code Machines

SPACING BLOCK RACK
The rack holds six Framon spacing blocks securely. Blocks snap in and out of the rack in seconds. Two mounting screws are provided to attach the spacing block rack to your code key machine.

PART #: F2SH750 - For the #1 & #2 Code Key Machines Only

#6 Spacing Block for Framon #1 and #2
Spacing block #6 is now available for the Framon #1 and #2 Code Key Machines. The new block has spacings for the Toyota and GM 10-cut series, as well as Kia Y7001-8200 and 10 others.

PART # F2MSSB6 - For the Framon #1 and #2 Code Key Machines

DOUBLE-SIDED VISE
This vise will hold the wide, deeply milled blanks such as X160, X161, X176 and X184 that tend to tip in the standard vise. The reverse side of the double-sided vise has a built-in tip stop and special millings to hold all interchangeable-core keys firmly. The vise eliminates the need for shims and wires to hold these blanks. Fits Framon #1, #2 or #20.

PART # F2SH050 - For the #1, #2, and #2D Code Key Machines

SPACING BLOCK SET FOR DOMESTIC AND IMPORT SPACING
72 different spacings from .045" to .170". Includes new Toyota 10-cut (50001-69999 code series) as well as Ford 10-wafer spacing and VB series with double cuts. These blocks snap in and out of the spacing block holder and fit all existing Framon Code Machines. Also included is a new spacing clip for tip-stopped keys.

PART # FSB1001 - For the #1 and #2 Code Key Machines only

SPACING BLOCK SET FOR SAFETY DEPOSIT BOX KEYS
Offered in three different kits. The F2MSDB1 includes three safety-deposit blocks with spacing for Diebold, Mosler, HHM, S & G, York, etc. The F2MSDBC2 includes the blocks plus .055", .066" and .088" high-speed steel slotters. The F2MSDBC3 includes the blocks and carbide slotters.

For the #1 and #2 Code Key Machines only

MEDECO KEYMARK™ VISE
A special vise is needed to hold and cut Medeco KeyMark keys. Due to the varied angles on the legs of the KeyMark keys, we suggest that you send in a blank before purchasing the vise.

Part # F2SH065 - For the #1, #2, and #2D Code Key Machines

TIBBE KEY ATTACHMENT
An attachment for cutting Tibbe keys. This unit will fit all Framon Code Key Machines and comes complete with a .088" carbide slotter and instructions for use. This unit will cut both the 6- and 8- wafer Tibbe keys used on Ford and Jaguar autos. These keys can now be cut quickly and accurately at a very low cost by Framon code machine owners.

PART # F2SH070 - For the #1 and #2 Code Key Machines only

DEPTH AND SPACE MANUAL - VOLUME  11, 8/03
This edition contains depth and space information for domestic keys, import keys, flat steel keys and safety deposit keys. It's the largest and most comprehensive depth and space manual available. The Depth and Space Manual gives progressive spacings as well as spacing block reference numbers.

PART # F2MS350 (If your binder is in good shape, save money and order the filler pages only: PART # F2MS355)

FRAMON REPLACEMENT PARTS